Coship Receiver Retune Instructions

SUNY Receiver Manual Tuning Instructions  for Coship Model CDVB5110D

The tuning process requires the receiver’s remote control. The remote can be identified by the 4 buttons which are on the 3rd row up from the bottom, and colored red, green, yellow, and blue from left to right.
When you get started, the receiver most likely displays “E-48 No Signal”, or “E-52 Searching For Signal” on your TV screen, and the light on the receiver is either red, or flashing between red and green.

• Press “MENU” on the remote.
• Press “1” (Installation).
• You’ll be prompted to enter a password. Enter “9949”.
• Press “1” (Channel Search).
• Press the “Green” button (labeled “AUDIO” on the remote) to enter the “TP Edit” screen.
• Press the yellow button to delete this entry. You should see a “scissors” icon to the right of the entry.
• Press the “Exit” key, and a precautionary screen will pop up as a warning. Press the “OK” key to confirm this deletion.
• Press the “Green” button two times to enter the “Insert Transponder” screen.
  With your up/down arrows, highlight “Frequency” in yellow.
• Enter “12177”, and press “OK”.
• Arrow down to highlight “Symbol Rate”.
• Enter “20500”, and press “OK”.
  
• After a few seconds you should see Level and Quality indications on the screen of 40% or better, and the light on the front of the receiver should be green, indicating a signal lock.
• Press the “Exit” two times.
• Press the “Blue” button for “manual scan”.
• Arrow down to highlight “Start Scan” in Yellow, followed by “OK”. This brings up the “Search Type” screen. The “NIT switch” should indicate “On”. If not, press the left or right arrow button to change from “Off” to “On”.
• Press “OK”. Picture should come up behind the menu in a few seconds and the menu screen will then disappear.
• You should now see the familiar color bars on the screen with our “NYN Channel 1” and clock. Everything will operate as it did before, except there will be no channel 2 displayed when scrolling through the channels. (ex: 1, 3, and 9 viewable with channels 4, 5, 6, 7, and 8 scrambled).
  

That’s it! You’re all done!

Satellite details

If you have questions or problems call:
NYN satellite technical support hotline- (518) 453-9521  
If busy call:  (518) 443-5333

To book satellite time call:
David Poplawski (518) 443-5333 
email: pop@nyn.suny.edu